Toshiba TDP-TW420 - Manual (Page 20)

38 39
Operations
Using the menus 1 (Continued)
The display setting menu
Use this menu to set screen display-related items.
(The items in gray color cannot be set with the current input selection.)
Item Description
Screen size Screen size setting
[ or : Enter setting] [ :Selection] [Enter: ]
Normal/Full/Thru/Wide
Up/down
shift Lets the projected images shift vertically when the screen size setting is wide
display (within the range of 1024 × 768).
Lower the image
Raise the image
Language Select one of the languages below to use for displaying the menu and messages
[
or : Enter setting] [ :Selection] [Enter: ]
/ / / / / / / /
/ / / / / / / /
/ / / / / / Indonesia
Background Screen to display when there is no input signal
[ or : Enter setting] [ :Selection] [Enter: ]
Logo/Blue/None
Icon Display icons as function guides On Off
Start-up
screen
Display start-up screen when power is turned on On Off
User logo Display a logo customized by the user for the start-up screen or when there is no
input signal.
[
or : Enter setting] [ : Selection]
Logo registration Press to display the registration menu.
Display style
Logo confirmation Press .
Reset logo Yes No
N Detailed description
[Screen size]
Normal : Enlarge an input image to fit the screen without changing the aspect
ratio of video signals.
Full : Displays an input image in 1024 × 768 dot resolution by enlarging it
to fill the entire screen.
Thru : Displays an input image in the native resolution of the video signals.
Thru display is not available for Y/P B /P R , Video and S-Video-input
images.
The larger image than the screen size will be displayed over the
screen. The input image may appear vertically long with some
frequencies of video signals.
Wide : Displays an input image in the center of the screen with a 16:9 aspect
ratio by enlarging it to fit the width of the screen. The upper and lower
portions of the image will be compressed.
Wide display is not available for Computer and Network-input images.
For Y/P B /P R input, screen size setting function is not available for the video signals
with a 16:9 aspect ratio.
For the Network-input images, the size can be set only when the image is
displayed. The size setting is not available when the projector is connected to your
computer using the Network Projector (Windows Vista
® ) function. It may fail to
display the image to fill the entire screen with some input image sizes.
For the USB memory-input images, the size cannot be set.
Note
If you use the screen size setting function on commercial video software,
broadcast or cable-broadcasting programs to display images with the varying
aspect ratio except for the purpose of your private viewing and listening, it may
infringe the copyright protected by the copyright laws.
[Up/down shift]
Shifts the projected image vertically when [Screen size] is [Wide].
[Background]
TOSHIBA is set for [Logo] by factory setting.
If user’s logo has been registered, it is displayed when [Logo] is set for
background.
[Start-up screen]
If user’s logo has been registered and this setting is [On], the logo is displayed at
start-up.
[User logo]
Registers a part of the image that is input from computer, as a stationary picture and
displays it as a logo at start-up and when no signal is input.
•
•
•
•
•
•
•
•
•
•