Toshiba TDP-TW420 - Manual (Page 19)

36 37
Operations
The image adjustment menu
Use this menu to set or adjust image-related items. Items that can be set or adjusted
are marked “Yes”, and those that cannot are marked “No”. (When an item is masked, it
indicates that you cannot select for the current input.)
Item Description
Digital Analog
Video S-video Network
USB
memory RGB Y/P B /P R RGB Y/P B /P R
Contrast Adjust the image contrast.
Lower Higher
Yes Yes Yes Yes Yes Yes Yes Yes
Brightness Adjust the brightness of the image.
Darker Brighter
Yes Yes Yes Yes Yes Yes Yes Yes
Color Adjust the color of the image.
Lighter Deeper
No Yes No Yes Yes Yes No No
Tint *1 Adjust the tint of the image color.
Reddish
Greenish
No No No No Yes Yes No No
Sharpness Adjust the sharpness of the image.
Softer Sharper
No Yes No Yes Yes Yes No No
Picture mode Press . Toggle the picture
mode with .
Bright/Standard/True color
Yes Yes Yes Yes Yes Yes Yes Yes
Advanced
adjustment
Press
to enter the
advanced
adjustment
Noise
reduction
*2
Adjust the screen noise
reduction level.
Softer Stronger
Yes Yes Yes Yes Yes Yes Yes Yes
R-level Adjust red of the image color.
Less
red More red
Yes Yes Yes Yes Yes Yes Yes Yes
G-level Adjust green of the image color.
Less green
More green
Yes Yes Yes Yes Yes Yes Yes Yes
B-level Adjust blue of the image color.
Less
blue More blue
Yes Yes Yes Yes Yes Yes Yes Yes
NTSC
mode
*3
Set the black level with .
US : NTSC (US) mode
JAPAN : NTSC (JAPAN) mode
No No No No Yes Yes No No
DVI mode *4 Set the connecting device with
.
PC : connect to PC
AV equipment : connect to AV
equipment
(DVD player)
Yes Yes No No No No No No
*1: [Tint] can be displayed and adjusted only when the video signal is set to [NTSC] or [NTSC4.43].
*2: [Noise reduction] may not work depending on signal type.
*3: [NTSC mode] can be displayed and adjusted only when the video signal is set to [NTSC] or
[NTSC4.43]. NTSC mode is set to JAPAN when the language is set to Japanese. It is set to US for
other languages.
*4: If the output settings of the connected device are incorrectly set, black and dark areas of the
picture may not be displayed properly.
■
Using the menus 1 (Continued)
The position adjustment menu
Use this menu to set or adjust picture position-related items. Items that can be set or
adjusted are marked “Yes”, and those that cannot are marked “No”. (When an item is
masked, it indicates that you cannot select for the current input.)
Item Description
Digital Analog
Video S-video Network
USB
memory RGB Y/P B /P R RGB Y/P B /P R
Phase Adjust to eliminate fl icker with
No No Yes No No No No No
Frequency Adjust with to eliminate
periodic patterns and fl ickering
when fi ne vertical lines appear
on the screen.
No No Yes No No No No No
H-position Adjust the horizontal position
of the image.
Move
left Move right
No No Yes No No No No No
V-position Adjust the vertical position of
the image.
Move down
Move up
No No Yes No No No No No
Clamp pulse 1 Adjust the clamp pulse position.
Lower Higher
No No Yes No No No No No
Clamp pulse 2 Adjust the clamp pulse width.
Narrower
Wider
No No Yes No No No No No
■