Toshiba TDP-TW420 - Manual (Page 12)

22 23
Preparations
Connection
Before connection
Read the owner’s manual of the device you are connecting to the projector.
Some computers cannot be used with or connected to this projector.
Check for an RGB output terminal, supported signal
p.97 , etc.
Turn off the power of both devices before connecting.
The fi gures below show sample connections. This does not mean that all of these devices
can or must be connected simultaneously.
Connecting with computers
Notes
The MONITOR OUT terminal outputs analog RGB signals from the COMPUTER 1 IN
terminal or the COMPUTER 2 IN terminal, or outputs Y/P
B /P R signals as selected with the
INPUT button. If no input is selected, the MONITOR OUT terminal outputs the input signals
last selected for each input terminal. (Digital RGB signals will not be output.)
Signals are output from MONITOR OUT ter minal even in standby mode.
However, from AUDIO OUT terminal, no audio signal is output.
A computer monitor cannot accept Y/P
B /P R signals correctly.
•
•
•
•
•
•
•
Connecting with AV equipments
Notes
The AUDIO (L/R) terminal doubles for devices connected to S-VIDEO terminal and VIDEO
terminal.
When an AUDIO OUT terminal is connected, sound is not output from the projector
speaker.
Output volume of AUDIO OUT terminal can be adjusted by the VOL button. •
•
•
To Y/C B /C R
outputGreen
(Y)/Blue
(C
B )/Red (C R )
Audio cable
(not supplied)
Audio amplifier, etc.
Conversion
adapter
HDMI-DVI
(not supplied)
To HDMI output
Audio cable
(not supplied)
DVD video recorder, etc.
Conversion adapter
BNC-pin (not supplied)
To audio
output
White (L)/
Red (R)
Monitor cable
Mini D-sub
15P-BNC
(not supplied)
To DVI output To audio
output
White (L)/
Red (R)
DVI cable
29-pin
(not supplied)
Audio cable
(not supplied)
To audio output
White (L)/ Red (R)
AV cable
(not supplied) S-video cable
(not supplied)
To video output
(yellow)
To S-video
output To audio input
White (L)/ Red (R)
Video recorder, etc.
DVD video recorder,
DVD player, etc.
RGB cable
(not supplied) Audio cable
(not supplied)
To audio input
Speaker with built-in amplifi er
Control cable
(not supplied)
To RGB output
Computer
To audio
output To audio output
RGB cable
(supplied)
Audio cable
(not supplied)
To DVI output
DVI cable
(not supplied)
Audio cable
(not supplied)
Monitor
To RS-232C
terminal
Computer
(for control)
Computer