Tunturi J3.5F User Manual

Page 9

O W N E R ’ S M A N U A L

•

J 3 . 5 F

ERROR CODES

The user interface will display information about
certain operational faults.

ERR 01:

speed sensor error. Turn the power

switch off and on again to reset the treadmill. If
treadmill recovers to normal operation, you may
continue to use the treadmill. If treadmill does
not recover to normal operation, then call the
dealer for service.

ERR 02:

over speed error. Call your dealer for

service.

ERR 03:

safety key error. Secure the safety key in

place and continue training.

ERR 05:

Incline motor error. Turn the power

switch off and on again to reset the treadmill.
Press simultaneously -, + and elevation down
keys for automatic self-calibration. If treadmill
recovers to normal operation, you may continue
to use the treadmill. If treadmill does not recover
to normal operation, then call the dealer for
service.

ERR 11:

Communication error. Turn the power

PROTECTIVE CIRCUIT

To protect your safety, this treadmill is designed
and equipped with run away protection. If the
admissible operating speed of the trainer is
exceeded or fallen below, the protective circuit
will shut off the treadmill to protect you and the
equipment. The treadmill will flicker all display
values to alert the user to the condition. Reset
the treadmill by turning the power switch off for
1 minute and then on again. This will return the
treadmill back to normal operating mode.

MOVING AND STORAGE

Folding and unfolding of this treadmill is made
easy with the assistance of gas cylinder. After the
treadmill has come to a complete stop, unplug
the power cord from the wall and the treadmill.

NOTE!

Ensure the deck is in 0 % elevation.

Fold up the deck; when you hear a click, the deck
is locked in place. The lock release handle is on
the left-hand side of the rear support. Release the
running track lock by pulling the handle down.
To release the folding lock, support the deck with
your right hand while you release the lock with
your left hand. Deck is ready to be positioned
horizontally on the ground.

NOTE!

Please handle with caution although it is

designed with the gas cylinder taking most of the
weight off the deck.

Lift up the treadmill from the rear to an angle
and push it on the transportation wheels. Lower
the treadmill carefully onto the floor.

NOTE!

Transport the treadmill with extreme

caution over uneven surfaces, for example over
a step. The treadmill should never be transported
upstairs using the wheels over the steps, instead
it must be carried. We recommend that you use a
protective base when transporting the equipment.

NOTE!

The running belt needs to be realigned and

centered after moving.

To prevent malfunctioning of the treadmill,
store it in a dry place with as little temperature
variation as possible, protected against dust.
Always unplug the treadmill from the electrical
outlet when not in use.

TECHNICAL DATA

Length (storage position) ......186 cm (95 cm)
Height (storage position) .......136 cm (167 cm)
Width .....................................74 cm
Weight ...................................68 kg
Running surface ....................43 cm x 131 cm
Speed .....................................1,0-16,0 km/h
Elevation range .....................0-10 %
Motor .....................................2,0 HP (1,47KW)

J3.5F treadmill meets the requirements of
the EU’s EMC Directives on electromagnetic
compatibility (89/336/EEC) and electrical
equipment designed for use within certain
voltage limits (73/23/EEC). This product
therefore carries the CE label. J3.5F treadmill
meets EN precision and safety standards (Class
B H, EN-957, parts 1 and 6).

Tunturi_J35F 9

28.8.2003, 14:33:09