Toshiba 120/150 - Manual (Page 59)

7-8
INSTALL THE SOFTWARE
10 Connect the USB interface cable or parallel interface cable. (See p. 7-29)
Windows will detect the MFP and the Plug and Play screen will appear. If you are using Windows
XP with the parallel interface, go to step 12.
11 Begin installation of the scanner driver.
1. “TOSHIBA e-STUDIOxxx” (where xxx is the model name of your MFP) will appear in the “Found
New Hardware Wizard” dialog box. Select “Install the software automatically (Recommended)”
and click the “Next” button.
2. The “Install hardware” dialog box will appear. Click the “Continue Anyway” button.
3. When installation of the driver is completed, click the “Finish” button to finish the scanner driver
installation.
12 Begin installation of the printer driver.
1. “TOSHIBA e-STUDIOxxx” (where xxx is the model name of your MFP) will appear in the “Found
New Hardware Wizard” dialog box. Select “Install the software automatically (Recommended)”
and click the “Next” button.
2. The “Hardware Installation” dialog box will appear. Click the “Continue Anyway” button.
3. When installation of the driver is completed, click the “Finish” button to finish the printer driver
installation.
You have completed the installation of all the software.