Toshiba 120/150 - Manual (Page 35)

4-2
SPECIAL FUNCTIONS
DESCRIPTION OF SPECIAL FUNCTIONS
Toner save mode (p. 4-2)
Reduces toner consumption by approximately 10%.
Power save modes (p. 4-3)
The unit has two power save modes of operation: preheat mode and auto power shut-off mode.
Preheat mode
When the unit enters the preheat mode, the power save ( ) indicator will light up and other
indicators will remain on or off as before. In this condition, the fuser in the unit is maintained at a
lower heat level, thereby saving power. To copy from the preheat mode, make desired copier
selections and press the start ( ) key using the normal copying procedure.
Auto power shut-off mode
When the unit enters the auto power shut-off mode, the power save ( ) indicator will light up and
other indicators except the ONLINE indicator will go out. The auto power shut-off mode saves more
power than the preheat mode but requires a longer time before starting copying. To copy from the
auto power shut-off mode, press the start ( ) key. Then make desired copier selections and
press the start ( ) key using the normal copying procedure.
Auto clear (p. 4-3)
The unit returns to the initial settings a preset amount of time after the end of copy, or scanner job. This
preset amount of time (auto clear time) can be changed.
Resolution of AUTO & MANUAL mode (p. 4-3)
You can set the copy resolution used for AUTO and MANUAL ( ) exposure mode.
TONER SAVE MODE
1 Press the exposure mode selector key to select the
MANUAL (
) mode.