Toshiba 120/150 - Manual (Page 22)

2-7
3 Set the paper guides to the copy paper width. Insert the copy paper (print face down) all the
way into the bypass tray.
4 Press the tray select ( ) key to select the bypass tray. Set the number of copies if using
standard copy paper. Press the start ( ) key.
Print face
• Paper must be fed narrow side into the feed slot.
• Transparency film, labels, and other special purpose papers must be fed individually.
• When copying onto transparency film, remove each copy promptly.
Do not let copies stack up.
• When loading an envelope, make sure that it is straight and flat.