beautypg.com

Connecting your printer to a network, Direct ethernet connection to macintosh or pc, Requirements – Tektronix Phaser Color Printer 750 User Manual

Page 8: Procedure

background image

Networking Setup Guide

3

Connecting Your Printer to a Network

Connecting Your Printer to a Network

Direct Ethernet Connection to Macintosh or PC

Requirements

Two RJ-45, twisted-pair, 10Base-T cables

An Ethernet-port hub

Procedure

1.

Turn off your computer and the printer.

2.

Connect one end of an Ethernet cable to the Ethernet port on your computer. Connect
the other end to the hub.

3.

Connect the other cable to the hub and the Ethernet port on the printer.

4.

Turn on your computer and printer.

After the computer and printer are connected, refer to the configuration instructions for
your network type.

Note

The printer is not a SCSI device. Do not connect the printer to your
computer through the SCSI ports.

3094-73