Tektronix Phaser Color Printer 750 - Manual (Page 12)

Networking Setup Guide 7
Novell NetWare
Novell NetWare
Configuration software for NetWare Networks
For Windows environments, the following software is available:
■ PhaserShare Administrator (Tektronix). Use this application to configure the printer
and the network when using NetWare 3.x and 4.x.
■ NWAdmin (Novell). Use this utility to manage existing queues on networks running
NetWare 4.x in NDS mode.
For DOS environments, see the PhaserShare Networking Manual.
Printing the Configuration Page
Your printer’s Configuration Page reports information that you need for NetWare
configuration. For information on printing a Configuration Page, see The printer’s
Configuration Page on page 2.
On the printer’s Configuration Page, all zeros in one or more of the IPX Networks fields
indicates that the printer does not recognize the network connection; this probably
indicates a faulty cable connection, an incorrect frame type, or Reply to Get Nearest
Server has not been set to on. It must be set to on for at least one file server or router on
the same segment as the printer.
Installing the PhaserShare Administrator
The PhaserShare Administrator is on the printer’s CD-ROM. A single integrated installer
is used to install printer drivers, the PhaserShare Administrator, and other software.
1. Run the installer as described in Tektronix Installer for Windows on page 5.
2. When prompted, make the following selections:
■ Select Custom Install.
■ When prompted to select the components and sub-components you want to
install, check Net Admin. Support under Components, then check PhaserShare
(NetWare) under Sub-components.
■ To install the drivers and PPD files for your printer (recommended for first-time
installations), check Drivers under Components, then check Printer Driver
under Sub-components.