Tektronix Phaser Color Printer 750 - Manual (Page 14)

Networking Setup Guide 9
Novell NetWare
Select a print server
In the Main window Printer List, click the print server name/printer name.
Note
If the printer is not in the list of available printers, there could be a network
hardware problem, an incorrect frame type, or incorrect search options settings.
See Troubleshooting Windows configurations on page 10.
Launch the Quick Configuration Wizard
Click Quick Configuration to launch the Quick Configuration Wizard.
Configure the printer and set up queues
1. If desired, change the Print Server Name or Printer Name.
2. Select connection mode(s) by checking the box(es) for Bindery Services, NDS
Services, or both.
3. Click Next; the dialogs that follow allow you to configure Bindery connections, NDS
connections, or both.
Bindery connections
1. Select either the configuration file server or the preferred file server from the
drop-down list; click Next.
2. If the file server you want is not on the list, proceed with these steps:
a. Click File Servers.
b. In the File Servers Browse dialog box, select the server you want. Click OK.
c. In the File Server Selection dialog box, select either the configuration file server
or the preferred file server. Click Next.
3. Create and select a new queue, or select an existing queue. Click Finish.
NDS connections
1. Specify the current Directory Services Tree (the tree where the print server will
reside).
2. Specify the current Directory Services Context (the location in the directory services
tree where the print server will reside).
3. Create and select a new queue, or select an existing queue. Click Finish.