Toshiba TDP-P4 - Manual (Page 35)

33
If you’re using Windows 98:
1 Open “My Computer” icon, the Control Panel folder and
then the Display icon.
2 Click the Settings tab.
3 Verify that the Desktop area is set to 1280x1024 or less.
Problem: Color or text not being projected
• You might need to adjust the brightness up or down until the
text is visible. Refer to “Brightness” on page 17 for more infor-
mation.
Problem: The screen resolution is not right
• Make sure the computer’s video card is set for a resolution of
no greater than 1280x1024.
Problem: Image isn’t centered on the screen
• Move the projector to reposition the image.
• Reposition the image using the menu. Refer to “Horizontal
Position” on page 20 and “Vertical Position” on page 20.
• Be sure the projector is at a 90 degree angle to the screen.
Problem: Image is too wide or narrow for screen
• Adjust the zoom or projector placement.
• Adjust the resolution of your video card if it’s greater than
1280x1024.
Problem: Image is out of focus
• Turn the projection lens to focus the image.
• Make sure the projection screen is at least 5 feet (1.5 m) from
the projector.
• Check the projection lens to see if it needs cleaning.
Problem: Image and menus are reversed left to right
• Rear projection mode is probably turned on. Turn Rear Projec-
tion off in the Controls menu. The image should immediately
return to forward projection. See “Rear Projection” on
page 23.