Toshiba TDP-P4 User Manual
Page 21
18
U
s
i
n
g
t
h
e
P
r
o
j
e
c
t
o
r
Contrast
The contrast controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast changes
the amount of black and white in the image.
1
Highlight Contrast, press
SELECT
, use the
INCREMENT
and
DECREMENT
buttons to adjust the contrast, then press
SELECT
to accept your changes.
Tint
NOTE: The color setting applies
to video sources only. The tint
setting applies to NTSC video
sources only.
The tint adjusts the red-green color balance in the projected
image.
1
Highlight Tint, press
SELECT
, use the
INCREMENT
and
DECRE-
MENT
buttons to adjust the tint, then press
SELECT
to accept
your changes.
Color
The color setting adjusts a video image from black and white to
fully saturated color.
1
Highlight Color, press
SELECT
, use the
INCREMENT
and
DECRE-
MENT
buttons to adjust the color, then press
SELECT
to accept
your changes.
Blank screen
Blank Screen determines what color is displayed when there is no
active source and when the projector is in standby.
1
Highlight Blank screen, press
SELECT
, use the
INCREMENT
and
DECREMENT
buttons to cycle through the options blue, black,
and white, then press
SELECT
.