Toshiba TDP-P4 - Manual (Page 30)

28
M a i n t e n a n c e & T r o u b l e s h o o t i n g
3 Insert a small screwdriver or other flat object into the slot near
the front of the projector. Slide the screwdriver toward the
back of the projector to disengage the lamp access grill, then
slide the lamp access grill off (away from the lens).
WARNING: Be extremely careful
when removing the lamp module.
In the unlikely event that the bulb
ruptures, small glass fragments
may be generated. The lamp
module is designed to contain
these fragments, but use caution
when removing the lamp module.
F IGURE 21
Disengaging and removing the lamp access grill
CAUTION: Never operate the
projector with the lamp access grill
removed. This disrupts the air flow
and causes the projector to
overheat.
4 Pull the yellow tab on the lamp module.
F IGURE 22
Pulling the tab on the lamp module
tab