Technicolor - Thomson mkiiLDK 23hs - Manual (Page 57)

Operating the Menu System Operator's Manual LDK 23HS mkII - HS Camera System 6-3
Systems Menu
The system functions of the camera are grouped into
menus and sub-menus. When you first enter a menu (other than the MAIN
menu) the cursor is positioned next to the first item.
The TOP and PREVIOUS entries are not immediately
visible but are located above the first item. Use the
Rotary control to scroll up to them.
-
Select TOP to bring you back to the MAIN menu.
- Select PREVIOUS to go back to the menu that you
were in before the current one.
The systems menu is viewed in the viewfinder and
navigated by means of the Rotary control and the
Select button which are both located at the front of the
camera.
Entering the Systems menu
Press the Select button after the camera is switched
on. The MAIN menu screen shows five items. One
more item is hidden but becomes visible when you
scroll down using the rotary control. (Some of these
items may not appear if the user level is not set to 4.)
A cursor shows your position in the menu. The Rotary
control moves the cursor up and down.
Finding your way
Use the Rotary control to move the cursor through the
menu items. If a double arrow (>>) is visible, then
pressing the Select button brings you one level lower
in the menu system. Only five items are visible in each
menu. Scroll up or down to see any additional items.
Operate >>
Setup >>
VF/Lens >>
Install >>
Files >>
0 1-6
Diagnostic >>
The Operate menu above shows the items displayed
when you first enter the menu and the other items that
are available by scrolling up or down with the Rotary
control.
Leaving the Systems Menu
If you do not use the menu it disappears after a few
seconds. (This delay can be set at the VF / Txt Time
item in the Install menu.) However, when you press
the Select button again you enter the System menu at
the last position of the cursor and not at the top of
MAIN menu. Set the menu item at the VF / Txt Time
item in the Install menu to On and the menu will not
time out. Set this item back to Tim to let the menu
disapear after time out.
To prevent confusion the next time you enter the
System menu, it is advisable to leave the System
menu by returning to the MAIN menu (TOP).
Gain >>
Black >>
Contour >>
Sensor >>
Iris >>
1 3-11
Audio >>
Test >>
Knee >>
Matrix >>
Top >>
Previous >>
System Menu Rotary control
System Menu Select button