Technicolor - Thomson mkiiLDK 23hs - Manual (Page 25)

Configurations Operator's Manual LDK 23HS mkII - HS Camera System 3-3
THS 1388
LDK 20
Triax Cable
Maximum
Length
2,400 m (7,875 ft)
with 14 mm cable
Base Station
LDK 4500
LDK 200
Triax Cable
Maximum
Length
2,400 m (7,875 ft)
with 14 mm cable
Data Cable (2-wire)
Maximum
Length
350 m (1,150 ft)
Operational Control Panels
MCP II
LDK4609
MCP
LDK 4607
LDK 23HS mkII
CABLE TEST
AC
DC
CAM ON
ON AIR
0
mains
Camera Processing Unit HS mkII
Triax Cable
Maximum
Length
800 m (2,625 ft)
with 14 mm cable
1000 m (3281 ft) with minor
performance degradation
Base Station
LDK 4500
CPU
LDK 4058 mkII
Data Cable
(2-wire)
Data Cable
(2-wire)
AWB AWB Bar s Bar s STD file STD file
Gai n Gai n Filter Filte r
Clear ND1/4 ND1/16 ND1/64
Clear Star 4P Star 6P Soft Focus
1 2 3 4
A B C D
VTR
Save Ext.
Iris Std.
File
Smart card
Poweron
P we l Tracker
Aux
Prod Prog Cam +Floor Eng
Camera Base Station
Prod Prog Cam +Floor Eng
Camera Base Station
THOMSON
THOMSON
Multiple camera mode
Note
A maximum of 15 looped-trough standard camera
systems in one chain can be handeld, however, in a
multiple system the load of a LDK 23 HS (mkII) is
twice the load of a standard camera so with level 1
communication software the system can handle a
maximum of 8 LDK23 HS (mkII) camera's.
This configuration is the multiple camera Triax mode.
The camera is connected to a CPU as in the single
camera Triax mode. The data bus is looped-through
from CPU to CPU's, Base Stations, OCP's and MCP.
The OCP's (Operational Control Panels) are used to
control the cameras and a MCP (master Control Panel)
can also be connected to extend the control facilities.
The LDK 20 and LDK 200 studio cameras are of course
ideal companions for the LDK 23HS mkII, however,
other cameras of the Thomson Multimedia Broadcast
Solutions family such as the LDK 10p, the LDK20P
and the LDK 100 can also be included in this
configuration.