Technicolor - Thomson mkiiLDK 23hs - Manual (Page 37)

Location of Controls and Functions Operator's Manual LDK 23HS mkII - HS Camera System 4-5
Monitoring Functions
1 Viewfinder connector
Use this socket to connect the flying lead from the
viewfinder to the camera.
Caution
Do not attach a lens to the Viewfinder
connector 2 .
3 External video output connector
This BNC connector carries the external video signal
from the CPU which is selected with the external
signal selection switch 6.
4 Viewfinder signal selection switch
This switch is used to choose between the local
camera head signal (Y signal) or an external signal for
display (set with (5) ) in the viewfinder.
5 External signal selection switch
This switch is used to select the signal displayed in the
viewfinder when the viewfinder signal selection switch
(4) is in the EXT position. The signal displayed for
each position is as follows:
EXT 1 : CPU external input 1.
EXT 2 : CPU external input 2.
MIX 1 : CPU ext. input 1 and cam. Y signal.
MIX 2 : CPU ext. input 2 and cam. Y signal.
Note
Switches (4) and (5) are disabled when a large lens
adapter is used.
SUPER SLO SUPER SLOW MO W MOTION TION
HIGH SPEED HIGH SPEED
LDK23HS mk II
THS 1391
THS 1390
1 2
3
4
5