Technicolor - Thomson mkiiLDK 23hs - Manual (Page 13)

Assembling the Units Operator's Manual LDK 23HS mkII - HS Camera System 2-5
The horizontal position of the viewfinder can be
adjusted to suit your requirements:
a. Loosen the support bracket retaining screw (1).
b. Slide the viewfinder horizontally along the rail to
the desired position.
c. Tighten the support bracket retaining screw (1).
The dioptre hood and eyepiece of the viewfinder can
be rotated vertically.
The length of the eyepiece tube (2) can also be
adjusted by loosening securing lever (3) and moving
the tube back or forward.
To use the viewfinder at a distance press the button
(4) below or above the eyepiece tube and swing it free
of the associated clip (5). The display can now be
seen from further away.
Positioning the optional 1.5-inch viewfinder
THS 1374
1
2
3
4
5