Technicolor - Thomson mkiiLDK 23hs - Manual (Page 11)

Assembling the Units Operator's Manual LDK 23HS mkII - HS Camera System 2-3
Lens
To attach a lens to the camera head proceed as
follows:
a. Ensure that the lens locking ring (1) is in the
unlocked position - turned counterclockwise.
b. Remove the dust protection cap (2).
c. Slot the lens into the lens mount (3).
d. Turn the lens locking ring (1) clockwise to lock the
lens in place.
e. Connect the lens cable to the lens connector (4) at
the right side of the camera.
f. Clip the lens cable into the clip (5) provided.
Caution
Do not attach a lens weighting more
than 5 kg to the camera without a support.
Caution
Do not attach a lens to the Viewfinder
connector (6).
Note
Always mount the dust protection cap when the
lens is not connected to the camera.
SUPER SLO
W MO TION
HIGH SPEED
LDK23HS LDK23HS
mk II
THS1370
1 2
3
4
5
6