Toshiba 32ZT29B - Manual (Page 27)

RECORDING
27
Press the DTV MENU button on the TV remote
control and highlight
Timer Programming .
Press SELECT and the screen will show the
available recording slots.
Use the Q button to highlight an available slot or
one you want to change and press the SELECT
button again.
setting up a timed digital recording
Recording
continued
IF YOU HAVE A NEXTVIEW COMPATIBLE VCR, YOU DO NOT HAVE TO PROGRAMME YOUR VIDEO
just set it to record from the TV as described on the previous page. Once you have turned
VCR sync
Timer to ON you can set the digital timer.
1
2
3
4
The ENTER DETAILS screen
will now come up. Use the S ,
R , P, Q and number
buttons on the remote control
to enter your settings. The
timer uses the 24 hour clock.
Once you are happy with your settings, you must
press SELECT to
Store Entry . This will take you back
to choose another time slot.
Repeat for any more programmes you wish to
record and then press the
EXIT button.
You can enter up to ten timed recordings.
Please note, if you are viewing a
DIGITAL
programme at the same time as recording it,
you must NOT change to another
DIGITAL
programme or access any on-
screen menus
– the new programme will be recorded and so
will the menus. You can, however
, view an
ANALOGUE programme whilst the digital
recording is taking place but if you change from
ANALOGUE to DIGITAL the digital programme
display will be recorded.
MAIN MENU
Up/Down Enter
Timer Programming
Favourite List
Service List
Common Interface
Setup
ENTER DETAILS 12:24 21/03/2002
Programme
Start date
Start time
Stop time
002
21/03/2002
13:00
14:25
BBC TWO
Repeat
Subtitles
Once
Yes
Up/Down Adjust Store Entry
☛
One minute before the Start time is reached, the orange
indicator on the front of the TV will flash and you will be
prompted on the TV screen. Press SELECT to go to that
programme or EXIT to cancel the timer programming. The
orange indicator stays on during recording.
If you are watching another digital programme and
ignore the prompt, the television will automatically
switch to the programme to be recorded. This may
cause the programme display to be recorded.
You will not be able to watch another digital programme
whilst recording is taking place. If you do select another
digital programme, you will be warned on the TV screen.
You can however, view an analogue programme. Press
the ATV/DTV button then choose an analogue
programme.
If your VCR is not NEX TV IEW compatible you must
program your video. See your video manual.
TIMER PROGRAMMING 12:24 21/03/2002
Programme Date Start Stop Repeat Sub
––– ––––– ––/–– ––– ––:–– ––:–– –––– ––
––– ––––– ––/–– ––– ––:–– ––:–– –––– ––
––– ––––– ––/–– ––– ––:–– ––:–– –––– ––
––– ––––– ––/–– ––– ––:–– ––:–– –––– ––
––– ––––– ––/–– ––– ––:–– ––:–– –––– ––
––– ––––– ––/–– ––– ––:–– ––:–– –––– ––
Up/Down Edit entry Remove
5
6
Use the RED
button if you wish
to cancel/remove
any entries.
☛