Toshiba 32ZT29B - Manual (Page 26)

26
RECORDING
In order to record digital broadcasts you must connect your video recorder to your television using a
Full (21-pin) Scart lead. This Scart lead is connected to the Scart 2 socket on the back of the television and
into the IN/OUT Scart socket on the back of the VCR. See page 7 for Connections.
Recording digital broadcasts
setting up to record digital broadcasts
2 With the Q button, highlight AV connection .
EXIT : To exit
Feature menu
▼
▼
▼
▼
▼
▼
AV connection
Picture size/position
Surround set up
Panel lock
OFF
Automatic format ON
Blue screen ON ON
Geomagnetic
▼
▼
▼
▼
▼
This will allow a NEX TV IEW compatible VCR to respond to
the television’s Timer events. Now, set your NEX TV IEW
compatible video...
AV connection
▼▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
Back
Digital input-1
EXT 4
Digital input-2 EXT 3
EXT2 input AV
EXT3 input AV
EXT2 output DTV
VCR sync Timer ON
EXIT : To exit
▼
3
Press the R button and with the Q button
highlight
VCR sync Timer and press the R button
to turn it ON and then press the EXIT button.
on your NEX TV IEW compatible VCR...
Many TOSHIBA video recorders are NEX TV IEW
compatible… your dealer will be happy to advise you of
the current models available.
If you do not have a NEX TV IEW compatible VCR
you cannot use this feature and you must
programme your VCR as usual.
You will not need to programme your video as this TV
can control NEX TV IEW compatible VCRs when
recording digital broadcasts.
First, on your TV remote control, press the B button until
EXT2 shows on TV the screen, enabling the VCR menus
to be seen.
Now, set your video to recognise that the signal is
coming from the TV (nexTViewLink setting).
See your VCR owner’s handbook for details.
Now, set up your recordings… see the next page…
…when recording widescreen broadcasts, your
VCR should be set so that on playback it will
automatically switch the TV to the ‘wide’ setting
.
Some of the settings on this page are made on your
NEX TV IEW compatible VCR. Please refer to the VCR
Owner’s Manual for details of how to do this on
your model.
!
1 Press the TV MENU button on the TV remote
control and the R button to highlight
Feature
menu.
Timer sync
Remember to press the
the ATV/DTV button
to select between
DIGITAL and
ANALOGUE modes.
!
EXT2 output
is
automatically set to
DTV when recording
.
!
*
*
36ZT29B only