Pcmcia subsystem, Power subsystem – Texas Instruments 51X User Manual
Page 45
4.2.6
PCMCIA Subsystem
The notebook is equipped with an on-board PCMCIA host adapter PCMCIA
Controller) and sockets to support Type I, Type II or Type III options. The
PCMCIA Controller has the following features:
•
Single-chip PCMCIA host adapters
•
Direct connection to ISA (PC AT) Bus
•
Direct connection to PCMCIA 2.0 Bus
•
PCMCIA 2.0- and JEIDA 4.1-compliant
•
82365SL-compatible register set, ExCA-compatible
•
Automatic Low-power Dynamic Mode for lowest power consumption
•
Programmable Suspend Mode
•
Five programmable memory windows per socket
•
Two I/O windows per socket
•
Programmable card access cycle timing
•
8- or 16-bit CPU interface
•
8- or 16-bit PCMCIA interface support
•
ATA disk interface support
•
Automatic flash memory timing support
•
Easy host interface using ISA I/O addresses 03E0h, 03E1h
•
Mixed-voltage (3.3V or 5V) operation
•
Dual-socket-interface, 208-pin QFP
4.2.7
Power Subsystem
The Power Subsystem consists of the following major parts:
•
Power Management (hardware and software components)
•
AC Adapter
•
Primary Battery Board
•
Primary Battery Pack
4-6 Theory of Operation