Toshiba PDP002Z - Manual (Page 18)

E6581279⑤
- 17 -
7. Specifications
Item Specifications
Model number PDP002Z
Technical data
PROFIBUS DP-V0
PPO TYPE: 1 to 4 by No.3.072 Profile for Variable Speed Drives
Connector: D-Sub 9 pin female
Station address setting: DIP switch
Baud rate: 9.6 kbps up to 12Mbps
Use environments
Indoors, an altitude of 3,000m or less, where the product will not be exposed to direct
sunlight, corrosive or explosive gases, vapor, coarse particulates including dust, and
where there is no grinding fluid or grinding oil nearby
Ambient
temperature
-10 to +60°C
Storage
temperature
-25 to +65°C
Relative humidity 20 to 93% (no condensation and absence of vapor)
Vibration 5.9m/s 2 {0.6G} or less (10 - 55Hz)
8. Warranty
Any part of the inverter that proves defective will be repaired free of charge under the following
conditions:
1. If and when a trouble occurs on the option unit properly installed and handled within one
year of delivery, and if the trouble is clearly attributable to defects inherent in our design and
manufacture, the product will be repaired free of charge.
2. This warranty applies only to the option unit.
3. For the following kinds of failure or damage, the repair cost shall be borne by the customer
even within the warranty period.
1) Failure or damage caused by improper or incorrect use or handling, or unauthorized
repair or modification of the option.
2) Failure or damage caused by the option falling or an accident during transportation after
the purchase.
3) Failure or damage caused by fire, salty water or wind, corrosive gas, earthquake, storm
or flood, lightning, abnormal voltage supply, or other natural disasters.
4) Damage sustained as a result of the fact that the product was used for any application
other than that designated for the PROFIBUS option (circuit board) for the VF-AS1 /PS1 .
4. If terms and conditions of warranty are otherwise specified, priority is given to them.
- 17E -