beautypg.com

Connecting to the network, Installation method – Toshiba PDP002Z User Manual

Page 11

background image

E6581279⑤

- 10 -

4. Connecting to the network

4.1. Installation method

(1) Using the DIP switchon the PROFIBUS option, seta station address. (Refer to Section

4.2.)

(2) Connect a PROFIBUS connector to the PDP002Z. (Refer to Section 2.1.)

* If the PDP002Z is located at an end of the bus, connect a terminal resistor to it.

(When using a connector with

termination resistor

, set it ON.)

(3) Once all the parameters are set, the power must be cycled to the VF-AS1/PS1 for

these changes to take effect. (Refer to Section 5.)