Tally Genicom 5040 - Manual (Page 24)

Printer drivers and firmware User guide
16
Downloading firmware to
the printer To load new firmware to the printer, proceed as follows.
1.
Browse to the folder where the firmware files are stored.
2.
Double-click the Standard Model PB Flash V1.00.exe file.
3.
On the Memory Writer screen select the interface (in our example
serial port).
4.
Make sure that the settings for port, baudrate, parity bit and stop
bit are correct.
5.
Select MAIN FIRMWARE from Download Type.
6.
Click Browse and select the BL_XXXX.IPL file.
7.
Click FLASH NOW; the download process starts.
When the download process is finished, the printer performs an initial-
ization
8.
Repeat step 5 to 7 for the FWXXX.mfw file and the
PBCGXXXX.BIN file.