TurboChef Technologies High h Batch User Manual
Page 75
53
T H E I M P I N G E M E N T C I R C U I T
The Impingement Circuit
provides the high
temperature airflow necessary to brown and
cook food items. For a schematic that includes
all Impingement Circuit components, see
Figure 61, page 61. For more comprehensive
hardware descriptions, see page 69.
This section contains
Serviceable Component Information and
Replacement Instructions
Parts and Part Numbers
S E R V I C E A B L E C O M P O N E N T S
The following components of the Impingement
Circuit may at some point need to be replaced.
Blower Motor
Heater Element
Jetplates (Top and Bottom)
Swing Arm Assembly
Blower Motor (Figure 55)
A Brushless DC Switch reluctance type. Its top
speed is 7200 RPM at 3/4 HP.
To replace a defective Blower Motor:
1. Ensure “Cool Down” process is completed (“Cool
Down” message will disappear upon completion)
and unplug the oven.
2. Remove Blower Motor Controller (see page 32).
3. Disconnect wiring at Blower Motor Controller.
4. Remove Blower Motor Cover.
5. Replace defective motor with P/N HHB-8106.
6. Reconnect wiring and reinstall Blower Motor
Controller/Blower Motor Cover.
N U M B E R
PA R T PA R T
N U M B E R
71
Nut – Blower Motor (x6)
100905
72
Blower Motor
HHB-8106
73
Screw – Blower Motor Cover (x8)
101688
74
Blower Motor Cover
NGC-1081
: Removing the Blower Motor
71
72
74
73