TurboChef Technologies High h Batch - Manual (Page 44)

D I A G N O S I N G A N I S S U E
Viewing the Cumulative Operating Time (Figure 35)
The High h Batch oven logs the total amount of
time the oven has been on.
To view this statistic:
1. From Screen 1 of the Test Mode Menu, press
the “DOWN” Key to toggle to Screen 2 of the
Test Mode Menu.
2. Press the “ACCUM” Soft Key (bottom left) to
view cumulative operating time.
3. When finished, press the “BACK/STOP” Key to
exit the Test Mode Menu.
NOTE: To permanently erase the Cumulative
Operating time, press the “ENTER” Key when
viewing the total.
Viewing the Electrical Compartment (EC) Temperature
(Figure 36)
1. From Screen 1 of the Test Mode Menu, press
the “DOWN” Key to toggle to Screen 2 of the
Test Mode Menu.
2. Press the “ºELEC” Soft Key (top right) to view
the EC Temperature.
3. When finished, press the “BACK/STOP” Key to
exit the Test Mode Menu.
        : Viewing the Cumulative Operating Time
LEFT
RIGHT
Step: 2 In this example, the oven has been on for
15 hours and 30 minutes.
        : Viewing the Electrical Compartment (EC) Temperature
LEFT
RIGHT
Step: 2 In this example, the EC
Temperature is 110ºF (43ºC)
Step: 3 Simultaneously press and hold for 1
second to get to the Test Mode Menu
(Screen 1). NOTE: Oven must be in
the Off or Cool-down State. Step: 1
Step: 3 Simultaneously press and hold for 1
second to get to the Test Mode Menu
(Screen 1). NOTE: Oven must be in
the Off or Cool-down State. Step: 1
28