beautypg.com

1 − introduction, Supplied accessories, Rack-mounting the unit – Tascam D00935220B User Manual

Page 5: About this manual, Important safety instructions

background image

IMPORTANT SAFETY INSTRUCTIONS

TASCAM 202

MK

IV

Thank you for your purchase of the TASCAM
202MKIV Double Auto Reverse Cassette Deck.

Before connecting and using the unit, please take
time to read this manual thoroughly to ensure you
understand how to properly set up and connect the
202MKIV, as well as the operation of its many use-
ful and convenient functions. After you have finished
reading this manual, please keep it in a safe place for
future reference.

Dolby NR

Dolby NR is designed to reduce tape hiss, a noise
introduced during the recording and playback process-
es. This cassette deck is equipped with Dolby B-type
Noise Reduction.

The Dolby NR system affects both recording and
playback quality. In playback, be sure to set the
DOLBY NR switch to the same position used when
the recording was made.

Manufactured under license from Dolby Laboratories.

HX Pro headroom extension originated by Bang and
Olufsen.

Dolby, HX Pro, and the double-D symbol are trade-
marks of Dolby Laboratories.

Rack-mounting the unit

If you are mounting the unit in a rack, leave 1U of
space above it and 4 inch (10 cm) or more of space at
the rear.

Use the rack-mounting kit to mount the unit in a stan-
dard 19-inch equipment rack, as shown in this section.
Remove the feet of the unit before mounting.

Supplied accessories

In addition to this manual, the 202MKIV has been

packed with the following:
• A rack-mounting screw kit (screws and washers) ...1

• A warranty card ......................................................1

Contact your TASCAM supplier if any of these items

are missing.

About this manual

In this manual, we use the following conventions:

The names of keys and controls are given in the fol-
lowing typeface:

EJECT

.

The alphanumeric portion of the display shows a
message, this is shown in the following typeface:

CP01

.

If a preset indicator in the display (i.e. one which
cannot change, but is either on or off) is shown,
this is shown as follows:

PARALLEL

.

1 − Introduction