Tascam D00935220B - Manual (Page 13)

IMPORTANT SAFETY INSTRUCTIONS
TASCAM 202 MK IV
1
3 − Playback
Playback 2 (either TAPE 1 or TAPE 2)
A. To stop playback, press the STOP key ( ª ).
B. To stop playback temporarily, press the PAUSE
key. To resume playback, press the PAUSE key
again, or press the PLAY key ( ˙ or ¥ ).
While playback is paused, pressing the PLAY key
whose direction is opposite to the indicator ( ˙ or
¥ ) on the display, will switch the playback direc-
tion. This does not release the pause function.
Press
PAUSE or the same play key ( ˙ or ¥ ) again
to start playback on the other side of the tape.
C. Fast forward/Rewind
Press the Ô or  , key while in stop mode to
fast wind the tape.
To stop the fast winding tape, press the STOP
key ( ª ).
D. Tape counter
Press the COUNTER RESET key to reset the
tape counter to 0000 . You can use this func-
tion for easy relocation of any desired point on
the tape.
E. Pitch control (TAPE 1 deck only)
This control varies the pitch of the music dur-
ing playback (This control does not work dur-
ing recording or dubbing).
Turning the PITCH CONTROL knob clockwise
increases the playback speed and raises the pitch
up to +10%.
Turning the PITCH CONTROL knob counter-
clockwise reduces the playback speed and lowers
the pitch by a maximum of –10%.
F. To listen through headphones
WARNING
There is no level control for the headphones
output. Beware that sudden loud sounds may
occur depending on recorded material. You
should avoid prolonged exposure to high vol-
ume sound as this can damage your hearing.
Plug your headphones into the PHONES jack,
and put on the headphones.
Plugging into the PHONES jack does not disable
the line outputs.