Recording silence, Mic mixing recording, To create a blank of more than 4 seconds long – Tascam D00935220B User Manual

Page 19: To create a blank of less than 4 seconds long, To create a blank of more than 4, Seconds long, To create a blank of less than 4 seconds, Long, Important safety instructions, 4 − recording

IMPORTANT SAFETY INSTRUCTIONS

TASCAM 202

4 − Recording

TASCAM 202

Use this function to create blanks between songs
for proper operation of the Computamatic Program
Search (CPS) function.

Press the

REC MUTE

key when recording reaches the

desired point. No signal is recorded for about 4 sec-
onds and then the deck enters the record-pause mode.
To resume recording, press the

PAUSE

key.

To create a blank of more than 4 sec-

onds long

Hold down the

REC MUTE

key for the desired length

of time. When you release the key, the deck enters the
record-pause mode.

To create a blank of less than 4 sec-

onds long

Press the

PAUSE

key within 3 seconds of pressing the

REC MUTE

key.

NOTE

If you press the REC MUTE key when the deck is
in the record-pause mode, no signal is recorded
for about 4 seconds, and then the deck shifts
back to the record-pause mode.

Recording silence

Mic mixing recording

This function allows you to record your voice and
another audio source together on a cassette tape.

The mic sound is fed into both the Left and Right
channels so it is located in the center of the stereo
image.

You have the choice of either selecting the audio
source you want on the amplifier connected to the

LINE IN

jacks of the deck, or plugging the desired

source directly into the deck’s

LINE IN

jacks.

NOTE

To prevent feedback (howling), disable the
speaker outputs from the amplifier. Use head-
phones to monitor recording.
This cassette deck is not compatible with stereo
mics. Always use a mono mic.

•