To erase recordings, Quick record start, To stop recording temporarily – Tascam D00935220B User Manual
Page 18: To erase recordings quick record start, Important safety precautions, 4 − recording
![background image](/manuals/213909/18/background.png)
IMPORTANT SAFETY PRECAUTIONS
1
TASCAM 202
MK
IV
4 − Recording
8. When everything is ready, start recording by
pressing the
PAUSE
key or the play key whose
arrow points in the same direction as the indi-
cator.
To record on both tape sides, set the
REV MODE
switch to
Ê
or
ä
and press the forward play
key (y). If you press the reverse
PLAY
key (h),
recording will be done only on side “B”.
To stop recording, press the stop key (
ª
).
A To stop recording temporarily
Press the
PAUSE
key to stop recording temporarily.
A second press of the key resumes recording.
To erase recordings
When you make a recording, the tape is overwritten
(previous recording is erased). To erase a tape without
making a new recording, set the
REC LEVEL
control
to the minimum (0) position and press the
RECORD
key followed by the
PLAY
key (h or y).
Quick record start
Hold down the
RECORD
key and press the
PLAY
key
(h or y) corresponding to the direction you want the
tape to run.