beautypg.com

Features – Tripp Lite HCRK-3 User Manual

Page 8

background image

8

Features

Remote User Interface (RUI):

“Power” Button: This button turns the Power Supply Module’s outlets
(and any connected equipment) on and off.

To turn the Power Supply Module’s outlets ON: Press and hold the
“Power” button for one second. The alarm will beep once briefly after
one second has passed. Release the button. The “Power” LED will
illuminate. The “Power” button will turn the outlets on regardless of
whether the Power Supply Module is plugged in or not.

To turn the Power Supply Module’s outlets OFF: Press and hold the
“Power” button for one second. The alarm will beep once briefly after
one second has passed. Release the button. The “Power” LED will turn
off.

Alarm Mute Button: This button silences the Power Supply Module's
low battery alarm. To silence the low battery alarm, briefly press and
release the Alarm Mute button. The low battery alarm will beep once per
second unless it is silenced. Once the charge level falls below 30% (and
shutdown is imminent) the alarm will resume again after one minute.
Once the charge level falls below 30%, the user should save open files
and safely shut down connected equipment immediately. If the cart is
unattended and PowerAlert Software is loaded on a computer connected
to the Power Supply Module, PowerAlert will automatically save open
files prior to automatic shutdown.

“Power” LED: This green LED indicates whether the Power Supply
Module’s outlets are ON or OFF.

Battery Charge LED Meter: These LEDs will illuminate in several
sequences to indicate the approximate charge level of the Battery
Module. See “Operation” section for charts illustrating Battery Charge
LED Meter Display depending on different charge levels while
discharging and charging.

Communications Jacks: Connect the RUI to the Power Supply Module.

Power Supply Module:

AC Outlets: Provide filtered, pure sine-wave 120V AC power for all
equipment—computers, monitors, diagnostic devices, scanners and more.

Coiled AC Input Cord with Hospital-Grade Plug: Connects Power
Supply Module to any 120V AC wall outlet.

200608042 93-2618 Retrofit Kit 3 OM.qxd 9/14/2006 2:01 PM Page 8