Toshiba B-SP2D - Manual (Page 22)

3- 2
EO1-33038 3. APPEARANCE
3.2 INTERIOR
3.3 OPERATION PANEL
FEED Button
When this button is pressed, the printer issues the same label as the one
issued last. The function of this button differs depending on the print
mode.
Status Indicator (Red/Orange/Green)
The status indicator indicates the printer status; for example, lights when
the power is turned on or blinks when an error has occurred. For details,
refer to Section 11, Troubleshooting.
Power Button
A push power switch
To turn on the power, press this switch once. To turn off the power,
press and hold this switch for about 2 seconds. The power will
automatically turn off when the specified idle time* (selectable from 1, 5,
30, and 120 minutes) has passed. To turn on the power again, press this
button. The time can be selected on the PC.
* Period of time when no operation is performed or no data is sent from the PC.
3.2 INTERIOR
Black Mark/Feed Gap
Sensor
Strip/Batch Sensor
Platen
Media Guide
Strip Roller
Feed Gap Sensor
Print Head
Strip Bar
Media Holder