Toshiba Strata CIX IP5000-UG-VC - Manual (Page 134)

User Programming
Programming Feature Buttons
116
Strata CIX IP5000-series Telephone UG 07/09
Programming Feature Buttons
You can use the User Programming Mode (described below) for customizing your
IP5000-series display telephone without the aid of an Administrator or Service
Technician. The User Programming mode is accessed with a
Program
button
assigned to a Programmable Feature Button or through an access code. User
Programming enables users to customize these features:
• Programmable Feature Buttons – The IP5000-series telephones have 10 or 20
Programmable Feature Buttons to which the user can assign any one of
approximately 50 different features. Once a Programmable Feature Button is
programmed, press the button anytime you need to use the feature.
Notes
• ACD and FeatureFlex Application keys are not supported on programmable
feature buttons 11~20 of the large 9-line display telephone.
• Directory number and external line buttons cannot be added or deleted, but their
ring tones can be individually changed. See
“Ring Tones” on page 17 .
User Programming Mode
 To enter User Programming Mode, press the
Program
button
...or dial
#9876
. “USER PROG MODE” appears on your LCD. The Program
LED is steady green.
 To exit User Program Mode Lift the handset off-hook / on-hook.
Programmable Feature Button Codes
Programmable Feature Buttons are the unassigned buttons on your keystrip that can
be used to store features. The number of available Programmable Feature Buttons
depends on your telephone model and how the buttons are preassigned by the System
Administrator.
The following steps enable you to program features onto Programmable Feature
Buttons.