TANDBERG D1320202 - Manual (Page 3)

TANDBERG GW Data port Command Interface User Guide
3
1. Introduction
The TANDBERG GW Data port Command Interface User Guide contains guidelines on how
to use the textual command interface supported by the GW. The Data port Command
Interface can be accessed through Telnet via the LAN interface or through RS-232 by
connecting a serial cable to the serial interface connector, referred to as the Data port (ref.
chapter 2). Three Telnet sessions can be connected to the GW at the same time in addition to
the RS-232 connection.
If, after reading this manual, you require additional information concerning the use of the
TANDBERG GW Data port Command Interface, please contact your local TANDBERG
dealer who will be able to supply you with relevant information for special applications.