TANDBERG D1320202 User Manual
Page 20
![background image](/manuals/213479/20/background.png)
TANDBERG GW
Data port Command Interface User Guide
20
VideoPortal
Registers the 3G Gateway with the VideoPortal
NOTE! The GW needs to reboot before the changes will take effect.
Mode
System [1 .. 2] IP Address
sub-commands:
• Mode: If Mode = On the 3G Gateway is registered with 1 or 2 video
portals
• Address: IP address of the Video Portal the 3G Gateway is to be
registered to.
Example of VideoPortal feedback:
*c xConfiguration VideoPortal Mode: On
*c xConfiguration VideoPortal System 1 Address: "10.31.1.8"
*c xConfiguration VideoPortal System 2 Address: "127.0.0.1"