TANDBERG MXP - Manual (Page 25)

Installation
25
2.2 Connecting Cables
1. Power cable
Find the right power cable that works for your country in the accessories box, and connect to
power cable from base, and to an electrical distribution socket.
2. Microphone cable
Connect the microphone cable to the microphone.
3. a) ISDN BRI
Connect the ISDN cables to the ISDN sockets (S/T interface) provided by the network provider.
The main ISDN number will be that number associated with the socket to which ISDN cable
number 1 has been connected.
3. b) ISDN PRI
If using the PRI interface, the E1/T1 cable should be connected to a CSU (Channel Service
Unit). It is recommended that a CSU is used between the system and the PRI line from the
network provider, see
Appendix 8 .
4. LAN cable
To connect the system to a Local Area Network (LAN), connect the cable labeled "LAN
Ethernet" to a suitable Ethernet port on the LAN.
5. External Display device
a. S-video – connect cable from Codec Video Out 1 to External display
b. DVI-I / VGA – find cable in accessories box and connect cable from DVI-I out single
on the Codec to external display
c. Composite – find cable in accessories box and connect cable from Video out 4 on the
Codec to external display