Thermador 9000189697 - Manual (Page 31)

31
27. Adjusting the door opening
angle
Depending on the installation situation, it may be
necessary to adjust the door opening angle. A door
opening angle of 115° has been set at the factory.
To adjust the door opening angle to 90°:
q Open door to 90°.
q Insert the banking pin through the boreholes which
are now vertically aligned and drive in with
a hammer.
28. Changing the door spring
To adjust the door spring:
q Rotate the adjusting screw with a crossĆhead
screwdriver.
I = maximum spring tension
0 = no spring tension