Thermador 9000189697 - Manual (Page 20)

20
14. Attaching the toe kick panel
d CAUTION d
The maximum height of the toe kick panel is 4" from
the top of the floor. Do not cover ventilation slots in
the base panel. Risk of damage to the appliance.
q If required, cut the toe kick panel to the required
length.
q Attach the base panel to the appliance.
q Remove the protective film from the adhesive pads
on the Velcro.
q Fit the toe kick panel to the base panel and press
firmly into place.
q Put on the base panel (do not screw on) and
measure the difference in depth Y between the base
panel and toe kick panel of the adjacent furniture.
q Remove the base panel.
q Loosen the brackets for attaching the base panel
and push in all the way.
q Pull out the brackets by the measured amount Y.
q Screw the brackets tightly.