Thermador 9000189697 - Manual (Page 12)

12
Installation instructions
1. Checking the installation cavity
d CAUTION d
To ensure a safe, troubleĆfree installation and an
optimum overall view of the subsequent furniture
front, thoroughly check that the installation cavity
complies with the installation requirements.
Before starting the installation, check that the installation
cavity complies with all requirements for a safe and
troubleĆfree installation.
q Check the base.
Follow the instructions in the section on Installation
location" on page 6.
q Check the dimensions of the cavity.
q Check that the cavity is square.
q Check location of the socket.
Also follow the instructions in the section on
Connecting the power" on page 7 and in the
section on Installation dimensions" on page 8.
q Check location of the water connection.
(only for appliances with ice maker)
Also follow the instructions in the section on
Connecting the water" on page 7.
q Check attachment of the adjacent furniture/fixtures.
All furniture parts in the vicinity of the appliance
must be connected securely to the wall.
q Check that adjacent furniture/fixtures do not collide
(door opening angle).
2. Removing the packaging
d WARNING d
- The appliance may tip over while it is being
unpacked.
- The appliance is very heavy.
- When opening the appliance door, the appliance
may tip forwards.
Be careful, otherwise people who are helping may be
injured or the appliance may be damaged.
To protect the base from damage during installation:
q Attach a residual piece of carpet, lino, etc. to the
floor with adhesive tape in front of the intended
installation location.
q Move the appliance with a hand truck securely.
q Remove transportation packaging:
- Remove the cartoon. Use the cutter securely to
protect the surface of appliance.
- Take supplied accessories out of protection
parts of packaging.
d CAUTION d
Do not remove transportation safety devices which
protect the shelves and storage compartments inside
the appliance until the installation is complete,
otherwise the parts may be damaged.
q Check appliance for damage in transit.
Do not install the appliance if it is visibly damaged.
If in doubt, contact your dealer.