Thermador 9000189697 - Manual (Page 18)

18
q Unscrew the heightĆadjustable feet until the mark
on the base has reached the indicated guide
dimension (1¼" / 32 mm).
i It is very important to comply with this dimension for
the subsequent alignment of the furniture fronts.
q Align the furniture fronts with the spirit level.
i Note:
- Do not twist or jam the appliance inside the cavity!
When unscrewing the heightĆadjustable feet,
proceed gradually: Always alternate between left
and right, left and right, etc..
- The adjustment of the rear feet is facilitated if the
appliance is unloaded at the rear.
- If using a wooden beam as an alternative antiĆtip
device according to point 5 of this installation
manual, rotate the appliance all the way towards
the wooden beam.
11. Attaching the appliance to the
top of the cavity
q Screw the attachment plate lugs (top) to the
overhead furniture/fixtures.
q Fix the attachment plate side lugs (top) depending
on the installation situation. If there is no gap or only
a slight gap, it is not necessary to fix the side lugs.
q If there is a fairly large gap above the appliance, fit a
wooden beam above the appliance, ensuring that
the wooden beam fits the gap exactly.