Toshiba 32ZD26P - Manual (Page 22)

A
Check that Panel lock is not ON.
A
Check that the switch on the side is in TV mode.
Check that the batteries aren’t dead and that they
are inserted correctly.
Why doesn’t the remote control work?
I have a picture, but why have I no sound?
Why don’t the controls on the side of the TV work?
Q
A
Check that the correct input has been chosen,
S-VIDEO or AV. See AV connections .
Why is the video/DVD in black and white?
Q
A
Remove it by pressing the CALL button.
Why is there a message permanently on the screen?
Q
Q
Q
A
Blue screen in the Feature menu is ON. When
no signal is being received, the TV will turn off the
sound and switch the TV screen to blue. After 20 minutes
the TV will switch to Standby mode.
Why has my screen turned blue?
Q
Why can’t I see the video/DVD I am playing?
Q
A
Make sure you have connected the VCR or the
DVD player to the TV as shown on page 20, then
select the correct input using the B button.
A
Check Scart lead connection.
Why is the video picture good but there is no sound?
Q
A
Press the volume button + j or the sound mute
k button.
A
There is little or no colour…
When using an external source, for instance, a
poor quality video tape, if there is little or no colour,
improvements may sometimes be achieved. The
television is factory set to AUTO in the
Set up menu to
automatically display the best colour system.
To check that you have the best colour…
From the Set up menu select Colour.
With the S or R button, choose between AUTO,
PAL, SECAM, NTSC 4. 43 or 3. 58.
22
FOR YOUR GUIDANCE
Q
uestions
and
A
nswers
…
If you experience what seem like problems operating your TV, we recommend you read through these
simple checks.
22
1
2
Q
There IS a picture, but why is there little or no colour?
A
Check that the mains switch is on and check all
the connections. Press the Standby button
i on
the remote control to make sure that the TV is not in
Standby mode.
Q
Why is there no sound or picture?
… For quick
reference to topics,
see the INDEX at the
back of this manual.
☛
A
Yes, interference or a weak signal. Try a different
TV station.
Manual fine tuning may help.
Can anything else cause a poor picture?
Q
▼
▼
▼
▼▼
Set up
▼
▼
EXIT : To exit
Language ENGLISH
Colour AUTO
Auto tuning
Manual tuning
Programme sorting
Teletext
▼