Toshiba A210 User Manual

Page 260

Glossary-2 User’s Manual

SSA

SCSI

(Abbreviations continued)

SCSI: small computer system inter-
face

SIO: serial input/output

SO-DIMM: small-outline dual in-line
memory module

SVGA: super video graphics adapter

SDRAM: synchronized dynamic ran-
dom access memory

TFT: thin-film transistor

UART: universal asynchronous
receiver/transmitter

USB: Universal Serial Bus

VESA: Video Electronic Standards
Association

VGA: video graphics array

VRM: video ready modem

VRT: voltage reduction technology

adapter: A device that provides an
interface between two dissimilar elec-
tronic devices. For example, the AC
adapter modifies the power from a
wall outlet for use by the computer.
This term also refers to the add-in cir-
cuit cards that control external devices,
such as video monitors and magnetic
tape devices.

allocate: To assign a space or function
for a specific task.

alphanumeric: Keyboard characters
including letters, numbers and other
symbols, such as punctuation marks or
mathematical symbols.

alternating current (AC): Electric
current that reverses its direction of
flow at regular intervals.

analog signal: A signal whose charac-
teristics such as amplitude and fre-
quency vary in proportion to (are an
analog of) the value to be transmitted.
Voice communications are analog sig-
nals.

ANSI: American National Standards
Institute. An organization established
to adopt and define standards for a
variety of technical disciplines. For
example, ANSI defined the ASCII
standard and other information pro-
cessing requirements.

antistatic: A material used to prevent
the buildup of static electricity.

application: A group of programs that
together are used for a specific task
such as accounting, financial planning,
spreadsheets, word processing, and
games, etc.

ASCII: American Standard Code for
Information Interchange. ASCII code
is a set of 256 binary codes that repre-
sent the most commonly used letters,
numbers, and symbols.

async: Short for asynchronous.

asynchronous: Lacking regular time
relationship. As applied to computer
communications, asynchronous refers
to the method of transmitting data that
does not require a steady stream of bits
to be transmitted at regular time inter-
vals.