Toshiba A210 - Manual (Page 193)

User’s Manual 7-5
HW Setup and Passwords
HW
S
ETUP
AN
D
P
A
SSW
O
R
D
S
If there are only 2 HDDs, the Boot Priority Options setting will be like the fol-
lowing.
You can override the settings and manually select a boot device by pressing one
of the following keys while the computer is booting:
This procedure does not affect the settings.
*
In this computer, CD-ROM refers to the DVD-ROM, CD-R/RW or CD-RW/
DVD-ROM drives.
To change the boot drive, follow the steps below.
1. Hold down F12 and boot the computer.
2. Use the up/down cursor keys to select boot device you want and press
Enter .
U Selects the USB diskette drive.
N Selects the Network.
1 Selects the primary HDD.
2 Selects the secondary HDD.
C Selects the CD-ROM*.
❑ If a supervisor password is set, the menu above does not
appear when you use the user password to start the computer.
❑ The selection method above does not change the boot priority
settings in HW Setup.
❑ If you press a key other than one of those above or if the
selected device is not installed, the system will boot accord-
ing to the current setting in HW Setup.