Toshiba A210 - Manual (Page 255)

User’s Manual D-3
A
PPEN
DIX
D
When installing Wireless LAN cards, the channel configuration is managed as
follows:
◆ For wireless clients that operate in a Wireless LAN infrastructure, the Wire-
less LAN card will automatically start operation at the channel identified by
the Wireless LAN Access Point. When roaming between different access
points the station can dynamically switch to another channel if required.
◆ In a Wireless LAN Access Point, the Wireless LAN card will use the factory-
set default channel(printed in bold), unless the LAN Administrator selected a
different channel when configuring the Wireless LAN Access Point device.
Wireless IEEE 802.11 Channels Sets (Revision A)
Frequency Range Channel ID 5150-5850 MHz Note
36 5180
40 5200
44 5220
48 5240
52 5260
56 5280
60 5300
64 5320
100 5500
*3
104 5520
*3
108 5540
*3
112 5560
*3
116 5580
*3
120 5600
*3
124 5620
*3