Philips FC7070 User Manual

Page 28

Problem

Possible cause

Solution

The tank full/tank

empty light lights

up continuously

and the appliance

switches off while

flushing the mop-

ping nozzle.

The dirty water tank is

full.

Empty the dirty water tank (see chapter ‘Using your

AquaTrio’, section ‘Emptying the dirty water tank’)

and start the flushing procedure again (see chapter

‘Cleaning and maintenance’, section ‘Flushing your

AquaTrio’).

I cannot move

the appliance

forwards or

backwards.

One or more wheels

may be blocked by a

small object.

Switch off and unplug the appliance and then put it

on its side. Make sure the dirty water tank is empty

when you put the appliance on its side, otherwise

wastewater may leak out of the dirty water tank.

Check what is blocking the wheel(s). Remove any

object that could block the wheel(s). Put the appli-

ance upright again and resume cleaning.

I cannot find the

vacuum cleaning

function.

There is no separate

vacuum cleaning function.

When you switch on the appliance, the mopping

and the vacuum cleaning functions work at the same

time.

Note:

If the above solutions did not solve your problem, please visit www.philips.com/support or contact the

Philips Consumer Care Centre in your country.