Philips FC7070 User Manual

Page 23

Problem

Possible cause

Solution

The mopping nozzle

lid is not closed prop-

erly. The sound of the

appliance decreases and

the appliance no longer

applies water to the floor

because the mopping

brushes do not rotate

and the appliance does

not mop up anything.

Make sure the mopping brushes and the mopping

brush cover are assembled correctly. Close the mop-

ping nozzle lid properly. Make sure you press the lid

until it locks with a click (see chapter ‘Cleaning and

maintenance’, section ‘Reassembling the mopping

nozzle’).

I cannot close the

mopping nozzle

lid.

The mopping brush

cover is not present or is

not placed properly.

Place the mopping brush cover into the mopping

nozzle properly and then close the mopping nozzle

lid (see chapter ‘Cleaning and maintenance’, section

‘Reassembling the mopping nozzle’).

The appliance

leaves water

traces on the

floor.

You have moved the ap-

pliance sideways.

Only move the appliance forwards and backwards

(see chapter ‘Using your Aqua Trio’, section ‘Cleaning

tips’).

You have moved the ap-

pliance across a threshold

while it was switched on.

Make sure the mopping brushes stay in contact with

the floor. Switch off the appliance before you pull

it over a threshold to prevent water traces on the

floor or to prevent water from splashing from the

mopping nozzle (see chapter ‘Using your Aqua Trio’,

section ‘Cleaning tips’).

You have moved the

appliance with its nozzle

touching the floor while

it was switched off.

If you want to avoid water traces on the floor, move

the appliance by carrying it by its carrying handle

or by tilting it so that it rests on its wheels for easy

transport (see chapter ‘Storing and moving your

AquaTrio’).

You lifted the appliance

up from the floor imme-

diately after you switched

it off.

After you switch off the appliance, move it forwards

and backwards a few times to remove the liquid that

is present between the two mopping brushes. If you

switch off the appliance and lift it up immediately

afterwards, the water that was present between the

brushes leaves a trace of water on the floor.

The wheels are blocked.

Check the condition of the wheels. Remove the dirt

that blocks the wheels.

LISH