Chapter 5 snmp – Trango Broadband TrangoLINK-45TM User Manual
Page 38

SNMP
SNMP
Trango Broadband Wireless — TrangoLINK-45
page 38
Chapter 5 SNMP
SNMP
The TrangoLINK-45 supports SNMP (Simple Network Management Protocol). Network management consists of the
following 3 categories: configuration, Link and Association monitoring and Alarms. Besides this proprietary
Management Information Base (MIB) the TrangoLINK-45 also supports a large part of the MIB-II OIDs.
Review the Trango MIB (TRANGO-P5M-MIB.mib) available on our website for the complete listing of all MIB objects
available.
These capabilities allow the system administrator to provide superior service through higher network accessibility and
integrated performance monitoring.
Depending on your Network Node Manager (NNM) it may be necessary to append a “.0” onto the end of each of the
OIDs listed below for proper operation.
Objects for Configuration Name
Description
1.3.6.1.4.1.5454.1.40.1.1.1
verUnitType
Returns radios unit type
(0 = RU, 1= MU)
1.3.6.1.4.1.5454.1.40.1.8.3 sysswAutoScanMUSignal
Returns value of Auto Scan switch
(0 = off,1 = on)
1.3.6.1.4.1.5454.1.40.1.3 sysDefaultOpmode
Returns defaultOpmode setting
(0
=
off,1
=
on)
1.3.6.1.4.1.5454.1.40.1.4
sysCurrentOpmode
Returns current opmode setting
(0
=
off,1
=
on)
1.3.6.1.4.1.5454.1.40.1.5
sysActivateOpmode
Turns opmode on
1.3.6.1.4.1.5454.1.40.1.13.1
sysipconfigIpAddress
Sets IP address
1.3.6.1.4.1.5454.1.40.1.13.2 sysipconfigSubnet
Sets
subnet
1.3.6.1.4.1.5454.1.40.1.13.3
sysipconfigDefaultGateway
Set default gateway
1.3.6.1.4.1.5454.1.40.1.13.4
sysipconfigChange
Activates IP address change
1.3.6.1.4.1.5454.1.40.2.1 rfPeerDeviceID
Configure
PeerID
1.3.6.1.4.1.5454.1.40.2.2
rfActiveChannel
Displays
current
channel
1.3.6.1.4.1.5454.1.40.2.3 rfActivePolarization
Displays current antenna polarization
1.3.6.1.4.1.5454.1.40.2.4 rfSpeed
Displays
current
Speed
setting
1.3.6.1.4.1.5454.1.40.2.5 rfTxPower
Displays current transmit power (dBm)
1.3.6.1.4.1.5454.1.40.1.14
sysRemarks
Display
radios
remarks
Objects for Link and Association Monitoring
1.3.6.1.4.1.5454.1.40.2.12
rfRSSI
Displays
RSSI
value
(dBm)
1.3.6.1.4.1.5454.1.40.2.13
rfAssociated
Displays current association status
(0
=
disassociated,1
=
associated)
1.3.6.1.4.1.5454.1.40.3.2
ruReboot Reboots
RU
1.3.6.1.4.1.5454.1.40.3.3
ruDistance
Displays
current
ru
distance
Objects for Bandwidth Monitoring
1.3.6.1.4.1.5454.1.40.1.9.1 systrafficEthInOctets
Displays Ethernet in (bytes)
1.3.6.1.4.1.5454.1.40.1.9.2
systrafficEthOutOctets
Displays Ethernet out (bytes)
1.3.6.1.4.1.5454.1.40.1.9.3
systrafficRfInOctets
Displays RF in (bytes)
1.3.6.1.4.1.5454.1.40.1.9.4
systrafficRfOutOctets
Displays RF out (bytes)
Objects for Alarm Monitoring
1.3.6.1.4.1.5454.1.40.3.4.1.1 trapTrapDstEntry
1.3.6.1.4.1.5454.1.40.3.4.1.2 trapTrapDstEnabling
Enable/Disable
trap
1.3.6.1.4.1.5454.1.40.3.4.2 trapTrapIpAddress Set destination trap IP
1.3.6.1.4.1.5454.1.40.3.4.3
trapTrapCommStr
Set trap community string