Features of the cd-dj1, Top panel, Important safety instructions – Tascam CD-DJ1 User Manual
Page 9
IMPORTANT SAFETY INSTRUCTIONS
TASCAM CD-DJ1
Top panel
1
2
3
4
5
6
7
8
9
0
q
w
e
r
2- Features of the CD-DJ1
1
CD cover
To open the CD cover, lift the cover
from the indentations on the sides of the unit.
When a disc is loaded and the CD cover is closed,
the CD-DJ1 will read the disc information (TOC).
After reading is complete, the unit will pause.
2
Lock lever
When the CD cover is closed, pulling
this lever down shows the
LOCK
label, indicating
that the CD cover cannot be opened.
Pushing the lever up shows the
UNLOCK
label,
indicating that the CD cover can be opened.
CAUTION
Please set the lever to LOCK when moving the
unit to prevent the disc from falling out.
3
TIME/ENTER and TITLE key
When the home
screen is displayed, pressing this key cycles
through the playback time display modes in the
following order:
ELAPSED
(track time elapsed)
œ
REMAIN
(track time remaining)
œ
TOTAL REMAIN
(disc time remaining).
NOTE
ELAPSED (track time elapsed) is the only
usable time display mode for MP playback.
REMAIN and TOTAL REMAIN modes cannot be
used.
When using the Setup menu, this key becomes the
ENTER
key.
Pressing this key while holding down the
SHIFT
key will cycle through CD text data or MP3 file
title information.
4
PLAY MODE and SHIFT key
Pressing this key
cycles through the playback modes in the fol-
lowing order: Continuous playback of all tracks
(default setting)
œ
Single-track playback
œ
Repeat playback (all tracks)
œ
Single-track repeat
playback.
This key acts as the
SHIFT
key when held down
with other keys. When used this way, the playback
mode will not be changed.
5
SKIP (
µ/≤
) keys
These allow track selection
both during playback and while the CD is paused.
For more information, please see
“
Track selec-
tion” on page 14.
During MP3 file playback, pressing this key while
holding down the
SHIFT
key will select folders
(see “Folder selection” on page 20).
6
SEARCH (
∆/˚
) keys
Search tracks, or pitch
bend a track when set to
BEND using SRCH KEY
setting in the Setup menu (see “Setup menu” on
page 13).