Canceling hot cue points, Using and confirming hot cue points, Flash start – Tascam CD-DJ1 User Manual
Page 17: Loop playback, Setting the in point, Setting the out point, Canceling loop playback, Dj functions, Points flash start
TASCAM CD-DJ1
1
5- DJ functions
Loop playback
Use this function to loop playback of any section of
an audio CD between set IN and OUT points.
The following procedure explains how to set and play
a loop section with starting (IN) and ending (OUT)
points.
Canceling Hot Cue points
Cancel a Hot Cue point by pressing its
HOT CUE/
CLEAR
key while holding down the
SHIFT
key.
Opening the CD cover also cancels the Hot Cue
points.
Flash Start
Use the
HOT CUE
keys for instant playback from
their cue points when the Flash Start function is on.
Turn the Flash Start function on and off with the
Setup menu FLASH item (the default setting is on).
When Flash Start is on, the
FLS indicator appears on
the display.
Setting the IN point
Press the
IN
key while the CD is playing or paused.
The
IN
key will light up and the
OUT
key will flash.
Press the
OUT
key while the CD is playing or
paused. The
IN
,
OUT
and
RE-LOOP/EXIT
keys will
all light up.
Loop playback will start immediately if the OUT
point is set while the CD is playing.
Setting the OUT point while the CD is paused moves
the pause position to the IN point. Push the
PLAY/
PAUSE
key to begin loop playback.
During loop playback, as soon as the OUT point
is reached, playback restarts instantly from the IN
point.
NOTE
The OUT point can only be set at a time following
the IN point.
The OUT point can be set to create a loop that
spans more than one track.
Setting the OUT point
Press the
RE-LOOP/EXIT
key during loop playback
to exit the loop mode and resume normal playback.
The key's light will turn off, but the loop IN and
OUT points will not be cancelled.
Using a
SKIP
,
CUE
or
HOT CUE
key to set the cur-
rent location outside the looped section will also exit
loop playback mode. The
RE-LOOP/EXIT
key light
will turn off, but the loop points will not be canceled.
Canceling loop playback
When Flash Start is off, you can jump to a Hot Cue
point and pause playback by pressing a
HOT CUE
key. If you press and hold down that
HOT CUE
key
again, playback continues from that HOT Cue point
until you release the key.
When you release the
HOT CUE
key, playback paus-
es and the playback position is reset at the Hot Cue
point. Hot Cue points can be confirmed using this
function.
To resume normal playback, press the
PLAY/PAUSE
key during playback while holding down a
HOT CUE
key.
Using and confirming Hot Cue points