Tascam TEAC PROFESSIONAL M-164 - Manual (Page 33)

TASCAM M-164/M-164FX/M-164UF
33
7 − Specifications and Block Diagrams
AUX SEND (1, 2) jacks
Connectors: 3-pole standard jacks
Circuit type: Pseudo balanced (tip: hot, ring: cold, sleeve:
ground)
Output impedance: 150Ω
Nominal output level: +4 dBu
Maximum output level: +20 dBu
PHONES jack
Connector: 3-pole standard jack (tip: L, ring: R, sleeve:
ground)
Maximum output: 45 mW + 45 mW (1% THD, for 32Ω
load)
Performance
(Measured at a –2 dBu operating level)
Frequency response (MIC inputs ➞ all outputs)
20 Hz – 20 kHz, +1/–3 dB (
TRIM at maximum, for 150Ω
load)
Distortion (MIC inputs ➞ STEREO OUTPUTS)
0.01% or less (20 Hz – 20 kHz,
TRIM at minimum)
Hum & noise (MIC inputs ➞ STEREO OUTPUTS)
With 1 mic input: –60 dBu or more (
TRIM at maximum)
With 6 mics input: –52 dBu or more ( TRIM at maximum)
Crosstalk
–80 dB (1 kHz)
Other
Power:
AC adaptor (TASCAM PS-1225L)
AC adaptor input: AC 100–240 V, 50–60 Hz
AC adaptor output voltage: 12V DC
AC adaptor output electric current: 2.5 A
Power consumption:
25 W
Dimensions:
390 (width) x 112 (height) x 344.5 (depth) mm
Weight:
3.3 kg (M-164), 3.4 kg (M-164FX), 3.5 kg (M-164UF)
Illustrations in this Owner’s Manual might differ from •
the appearance of the actual product.
In order to improve a product, its specifications and/
•
or appearance might be changed without notice.